Abrasives
Ballard Industrial stocks industrial abrasives for grinding, cutting, sanding, blending, and finishing metal, wood, and composites. Shop cut-off and grinding wheels, coated abrasives, non-woven surface conditioning products, abrasive brushes, files and rasps, and accessories from brands like 3M, Norton, PFERD, Rhodius, and Sait.
Not sure which grit, grain, or bond fits your job? Our Seattle team can help you choose. Contact us today!
Choosing the right abrasive
Start with the job: removing material fast, cutting through stock, blending a weld, or putting a finish on a surface. Then match the abrasive to your tool and the material you're working.
| Subcategory | Best for | What's included | What to know |
|---|---|---|---|
| Cut-Off & Grinding Wheels | Cutting stock and heavy material removal | Type 1 and Type 27 cut-off and grinding wheels, chop saw wheels | Match max RPM and arbor to your tool; never side-grind with a cut-off wheel |
| Coated Abrasives | Grinding, blending, and sanding | Flap discs, fiber discs, sanding belts, discs, and sheets | Grain and grit set cut rate and finish (see below) |
| Non-Woven Abrasives | Cleaning, blending, and finishing without changing dimensions | Surface conditioning discs, wheels, hand pads, and belts | Won't gouge the work; good for prep before paint |
| Abrasive Brushes | Removing rust, scale, paint, and weld spatter | Wire wheels, cup brushes, end brushes | Knotted wire is aggressive; crimped wire is lighter |
| Files & Rasps | Hand shaping, deburring, and fitting | Flat, half-round, round, and needle files; rasps | Files are for metal; rasps for wood and soft materials |
| Abrasive Accessories | Mounting and supporting abrasives correctly | Backing pads, mandrels, arbors, adapters, wheel dressers | Fiber discs need the right backing pad to run safely |
Grain and grit basics
The grain is the cutting mineral, and it affects speed, life, and price. The grit number sets the finish: lower numbers (24–60) remove material fast, and higher numbers (120 and up) leave a smoother finish.
| Grain | Best on | Performance |
|---|---|---|
| Aluminum oxide | General steel, wood | Economical all-purpose choice |
| Zirconia alumina | Carbon steel, stainless | Longer life under heavy pressure |
| Ceramic | Stainless, hardened steel, alloys | Fastest cut and longest life; runs cool |
| Silicon carbide | Cast iron, stone, glass, non-ferrous | Sharp and fast on hard, brittle materials |
Brands we carry
- 3M Cubitron – Precision-shaped ceramic grain that fractures to stay sharp, for fast cutting and long life on fiber discs, flap discs, cut-off wheels, and belts. A top choice for stainless and hardened steel.
- 3M Scotch-Brite – Non-woven surface conditioning discs, wheels, hand pads, and Clean and Strip products for blending, deburring, and paint and rust removal without gouging the work.
- Milwaukee abrasive brushes – Knotted and crimped wire wheels and cup brushes built for cordless and corded angle grinders, for rust, scale, and weld spatter.
- Norton – A full line of bonded and coated abrasives, including Gemini cut-off and grinding wheels and Blaze ceramic fiber and flap discs.
- PFERD – German-made grinding and cut-off wheels, flap discs, wire brushes, and burrs, including INOX lines for stainless work.
- Precision Abrasives – Coated abrasives for metalworking and fabrication, including belts, discs, sand paper sheets, and spiral bands.
- Rhodius – German-made thin cut-off wheels and grinding discs known for fast, clean cuts in stainless and steel with minimal burr.
- SAIT – Italian-engineered cut-off wheels and grinding wheels, a value-priced workhorse line for shops that go through a lot of product.
Help from people who know the work
Ballard has supplied fabricators, shipyards, and maintenance shops from Seattle's Ballard neighborhood since 1952. Tell us the material, the tool, and the finish you need, and we'll help you pick an abrasive that cuts faster and lasts longer. Call (206) 783-6626 or contact our team. Going through abrasives fast? Ask about bulk pricing, or let our vendor-managed inventory program keep your shop stocked so you never run out mid-job.
FAQ
What's the difference between a flap disc and a grinding wheel?
A grinding wheel removes material fast but leaves a rough finish. A flap disc grinds and blends in one step, leaving a smoother surface with less vibration and noise, so it often removes the need for a second finishing step.
What grit should I use?
Use coarse grits (24–40) for heavy removal and weld grinding, medium grits (60–80) for general blending, and fine grits (120 and up) for finishing and surface prep before paint.
Can I use the same abrasive on stainless and carbon steel?
It's best not to. Abrasives used on carbon steel can leave iron particles on stainless that later rust. Use a separate, contamination-free (INOX) abrasive for stainless work.
How do I know a wheel is safe for my grinder?
Check that the wheel's maximum RPM rating is at or above your tool's rated speed, that the arbor size matches, and that the wheel type fits your guard. Never use a cut-off wheel for side grinding.
Do you offer bulk or contract pricing on abrasives?
Yes. We offer bulk pricing for high-volume abrasive users, and our vendor-managed inventory (VMI) program tracks your usage and restocks your shop automatically, so the wheels and discs you rely on are always on hand.